Lashing strap 500kg 4m SH SPANITEX
br. 2 709 Ft



- Quick to fasten and release, with strong tensioning for a secure hold.
- When the webbing wears out, we can replace it.
- 2 m long, 500 kg load capacity.
USE
Two-piece, 500 kg quick lashing strap with a ratchet and two safety-latch hooks. The hooks attach to separate securing points. The self-hooking flat loop lies against the load without sticking out or twisting.
STRONGER TENSIONING WITH A RATCHET
After attaching the hooks, connect the flat loop to the ratchet and tension the strap. The ratchet is useful when the securing task calls for stronger tensioning. The strap can be released and tensioned again if needed.
READY FOR REUSE
When the webbing wears out, we can re-stitch it on request while retaining the metal fittings that are still fit for use.
LC
Maximum force for use in straight pull that a web lashing is designed to sustain in use. According to EN 12195-2 samples must be tested during the production. During the tests the complete lashing strap must sustain 2 x LC force, while the webbing must endure 3 x LC force.
LC tie down
The maximal tie down force affecting the load while the lashing strap sustains the maximum allowed force. The representation of this value is not regulated by EN12195-2, however common speech refer it as the capacity of the lashing strap. For example a "5 ton" lashing strap has an LC value of 2500daN and LC tie down value of 5000daN.
SHF (standard hand force)
Hand operating force applied on the ratchet (50daN = ~50kg). The handle has to be operated with this force to generate the standard tension force in the strap.
STF (standard tension force)
Residual force in the strap after release of the handle of the ratchet. The longer the ratchet is, the stronger force in the strap generated.
